1. If there are scratches on the surface of the bathtub, just use 2000# water abrasive paper to polish it, then apply toothpaste, and polish it with a soft cloth to make it as smooth as new.
2. The scale on the surface of the bathtub can be wiped with a soft cloth after adding mild acid detergent, such as lemon juice and vinegar.
3. The hydraulic friction device cleans 40 degrees Celsius hot water and fills the bathtub. Add 2 grams of detergent per liter, start the hydraulic independent type for about 5 minutes, stop the pump to drain water, then fill up with cold water, start the hydraulic independent type for about 3 minutes, and stop the pump Drain and clean the tub.
4. If the surface of the cylinder is dirty, it can be wiped with a wet towel. This process can be repeated three times, and it can be as clean as new.
5. Do not use rough-surfaced utensils containing chemical solvents or particles to clean the surface of the cylinder.
6. Do not hit and scratch the surface of the bathtub with hard objects or blades. At the same time, do not let cigarette butts or heat sources higher than 70 degrees Celsius touch the surface of the bathtub.
7. After the bathtub is used, the water should be drained and the power supply should be disconnected.
8. When the water returner and nozzle are blocked by hair and other debris, they can be unscrewed and cleaned.
9. Gold-plated and chrome-plated parts do not need to be wiped frequently.

The cleaning method of acrylic bathtub is relatively simple, and there is only one cleaning method for acrylic bathtub. Everyone should know it very well by now. Paying attention to acrylic bathtub cleaning is as important as paying attention to personal hygiene. Acrylic bathtub cleaning is also done to ensure your own health.