Home / News / What are the maintenance strategies for shower room?

What are the maintenance strategies for shower room?

Clean
When cleaning the four walls and bottom basin of the shower room, please use a soft dry cloth. If there is slight dirt, please use a soft cloth or sponge dipped in a neutral detergent to clean it. When removing stubborn dirt, please remove it with alcohol.
Do not use the following items for cleaning: acidic, alkaline solvents, chemicals (such as hydrochloric acid), acetone thinner and other solvents, decontamination powder, etc., otherwise it will have an adverse effect on the human body and cause some undesirable conditions in the product.

 

 

Pulley maintenance
1. Push-pull shower door, with sliding block and sliding wheel.
2. Problems that should be paid attention to in the use of pulleys and sliders:
One is to avoid slamming the movable door forcefully below, so as not to cause the movable door to fall off;
The second is to pay attention to regularly clean the slide rail, pulley, slider, and add lubricant (lubricating oil or lubricating wax);
The third is to adjust the adjustment screw of the slider regularly to ensure the effective load and good sliding of the slider on the movable door.

Daily maintenance
1. Please rinse with clean water for regular cleaning, and clean with glass water regularly to maintain the smoothness of the glass.
Use a neutral detergent to wipe off the dirt with a soft cloth. Stubborn stains can be removed with a small amount of alcohol. Avoid acid and alkaline solvents.
2. How to use and maintain the pulley in the shower room.
A. Avoid hitting the movable door forcefully from below, so as not to cause the movable door to fall off.
B. Pay attention to regularly add lubricant to the slide rail.
C. Regularly adjust to ensure the effective load and smooth sliding of the sliding door by the pulley.
3. Maintenance of tempered glass, aluminum alloy, artificial stone bottom basin.
A. Don't hit or impact the glass surface with hard objects (especially corners).
B. Do not wipe the glass surface with strong acid, strong alkali and corrosive solution, so as not to damage the surface gloss.
C. Do not wipe the glass surface with metal wire to avoid scratches.
D. Prevent direct sunlight and exploding sunlight.

0
Contact Us